Pre-alloyed Powder FeCuNi (X5-505) Description
Pre-alloyed Powder FeCuNi (X5-505) is manufactured by atomization method. Since each powder particle contains various metal elements that make up the alloy, the composition uniformity of the pre-alloyed powder is quite good. The carcass has high hardness and bending strength. This pre-alloyed powder can significantly improve the diamond holding power of the matrix and improve the sharpness and wear resistance of the tool.
Pre-alloyed Powder FeCuNi (X5-505) Specifications
|
Specification
|
|
Sintering Temperature (℃)
|
850
|
|
Oxygen Content (%)
|
≤0.3
|
|
Carcass Hardness
|
100-110HRB
|
|
Theoretical Density (g/cm3)
|
8.20
|
|
Bulk Density (g/cm3)
|
3.4
|
|
Bending Strength (Mpa)
|
1600-1900
|
Pre-alloyed Powder FeCuNi (X5-505) Applications
Pre-alloyed Powder FeCuNi (X5-505) greatly improves the performance of diamond tools and significantly reduces the cost of diamond tools. It is suitable for wear-resistant tools, such as concrete road chips, small saw blades for wall grooves, grinding discs, grinding blocks, etc.
Pre-alloyed Powder FeCuNi (X5-505) Packaging
Our Pre-alloyed Powder FeCuNi (X5-505) is carefully handled during storage and transportation to preserve the quality of our product in its original condition.
