Pre-alloyed Powder FeCuCoNi (X6-650) Description
Pre-alloyed Powder FeCuCoNi (X6-650) adopts a water atomization production process, and the entire production process uses high-quality and high-purity raw materials. The powder has high purity, few impurities, and stable product quality. The powder particle size distribution is concentrated, the oxygen content fluctuation range is small, and the controllability is strong. The product has good formability, high hardness, and bending strength. The enhanced formula is especially suitable for wire saws, gang saws, drill bits, and various high-end saw blades.
Pre-alloyed Powder FeCuCoNi (X6-650) Specifications
|
Specification
|
|
Sintering Temperature (℃)
|
850
|
|
Oxygen Content (%)
|
≤0. 25
|
|
Carcass Hardness
|
100-110 HRB
|
|
Theoretical Density (g/cm3)
|
8.4
|
|
Bulk Density (g/cm3)
|
3.3
|
|
Bending Strength (Mpa)
|
1100-1400
|
Pre-alloyed Powder FeCuCoNi (X6-650) Applications
Pre-alloyed Powder FeCuCoNi (X6-650) is suitable for wire saws, gang saws, drill bits and various high-end saw blades.
Pre-alloyed Powder FeCuCoNi (X6-650) Packaging
Our Pre-alloyed Powder FeCuCoNi (X6-650) is carefully handled during storage and transportation to preserve the quality of our product in its original condition.
